Equipment that measures permeation through membranes
—   Diffusion Cells  — —  Stirrers  — —   Automated Systems  —
Franz Cells Side-Bi-Side V-Series Franz Side-Bi-Side
In-Line Cells Dialysis Cells H-Series In-Line Custom
Custom Cells & Modifications Consulting Installation & Training
YOU ARE HERE: Home Franz Cells Franz Cell Stands
PermeGear Cell Stands

PermeGear Cell Stands are stainless steel assemblies designed to locate Franz cells over the stirring magnets in laboratory stirplates, and Side-Bi-Side Cell Stirrers. These Cell Stands are convenient for holding any vertical cell with a 30mm heating jacket so it may be more easily handled with two free hands. The stainless springsteel component is vertically adjustable to allow for the handblown quality of the cells and the placement of the tubes for the heating jacket. If 9mm or 11.28mm Franz Cells are used with pinch clamps, two cells may be used over each station of H1, H3 or H9 Stirrers. The Cell Stand part number is CS-01.

Photographs
  The images below are of a jacketed Franz Cell and an unjacketed Franz Cell. The lefthand jacketed cell is held vertically by a Cell Stand. We do not make cell stands for unjacketed cells but it is easy to quickly fashion one from sponge or foam material as is shown in the righthand image.  
PermeGear, Inc. 1815 Leithsville Road Hellertown, PA 18055 USA Tel 484-851-3688 Fax 484-851-3668
CONTACT Copyright ©2005 PermeGear, Inc.

Please excuse us while our site us under construction!